Basic Options

SDKs are configurable using a variety of options. The options are largely standardized among SDKs, but there are some differences to better accommodate platform peculiarities. Options are set when the SDK is first initialized.

Options are passed to the Init() method as an instance of sentry.ClientOptions:

Copied
sentry.Init(sentry.ClientOptions{
	Dsn: "https://examplePublicKey@o0.ingest.sentry.io/0",
	Debug: true,
	// Release: "my-project-name@1.0.0",
})
Copied
// ClientOptions that configures a SDK Client
type ClientOptions struct {
	// The DSN to use. If the DSN is not set, the client is effectively
	// disabled.
	Dsn string
	// In debug mode, the debug information is printed to stdout to help you
	// understand what Sentry is doing.
	Debug bool
	// Configures whether SDK should generate and attach stack traces to pure
	// capture message calls.
	AttachStacktrace bool
	// The sample rate for event submission in the range [0.0, 1.0]. By default,
	// all events are sent. Thus, as a historical special case, the sample rate
	// 0.0 is treated as if it was 1.0. To drop all events, set the DSN to the
	// empty string.
	SampleRate float64
	// Enable performance tracing.
	EnableTracing bool
	// The sample rate for sampling traces in the range [0.0, 1.0].
	TracesSampleRate float64
	// Used to customize the sampling of traces, overrides TracesSampleRate.
	TracesSampler TracesSampler
	// The sample rate for profiling traces in the range [0.0, 1.0].
	// This is relative to TracesSampleRate - it is a ratio of profiled traces out of all sampled traces.
	ProfilesSampleRate float64
	// List of regexp strings that will be used to match against event's message
	// and if applicable, caught errors type and value.
	// If the match is found, then a whole event will be dropped.
	IgnoreErrors []string
	// List of regexp strings that will be used to match against a transaction's
	// name. If a match is found, then the transaction  will be dropped.
	IgnoreTransactions []string
	// If this flag is enabled, certain personally identifiable information (PII) is added by active integrations.
	// By default, no such data is sent.
	SendDefaultPII bool
	// BeforeSend is called before error events are sent to Sentry.
	// Use it to mutate the event or return nil to discard the event.
	BeforeSend func(event *Event, hint *EventHint) *Event
	// BeforeSendTransaction is called before transaction events are sent to Sentry.
	// Use it to mutate the transaction or return nil to discard the transaction.
	BeforeSendTransaction func(event *Event, hint *EventHint) *Event
	// Before breadcrumb add callback.
	BeforeBreadcrumb func(breadcrumb *Breadcrumb, hint *BreadcrumbHint) *Breadcrumb
	// Integrations to be installed on the current Client, receives default
	// integrations.
	Integrations func([]Integration) []Integration
	// io.Writer implementation that should be used with the Debug mode.
	DebugWriter io.Writer
	// The transport to use. Defaults to HTTPTransport.
	Transport Transport
	// The server name to be reported.
	ServerName string
	// The release to be sent with events.
	//
	// Some Sentry features are built around releases, and, thus, reporting
	// events with a non-empty release improves the product experience. See
	// https://docs.sentry.io/product/releases/.
	//
	// If Release is not set, the SDK will try to derive a default value
	// from environment variables or the Git repository in the working
	// directory.
	//
	// If you distribute a compiled binary, it is recommended to set the
	// Release value explicitly at build time. As an example, you can use:
	//
	// 	go build -ldflags='-X main.release=VALUE'
	//
	// That will set the value of a predeclared variable 'release' in the
	// 'main' package to 'VALUE'. Then, use that variable when initializing
	// the SDK:
	//
	// 	sentry.Init(ClientOptions{Release: release})
	//
	// See https://golang.org/cmd/go/ and https://golang.org/cmd/link/ for
	// the official documentation of -ldflags and -X, respectively.
	Release string
	// The dist to be sent with events.
	Dist string
	// The environment to be sent with events.
	Environment string
	// Maximum number of breadcrumbs
	// when MaxBreadcrumbs is negative then ignore breadcrumbs.
	MaxBreadcrumbs int
	// Maximum number of spans.
	//
	// See https://develop.sentry.dev/sdk/envelopes/#size-limits for size limits
	// applied during event ingestion. Events that exceed these limits might get dropped.
	MaxSpans int
	// An optional pointer to http.Client that will be used with a default
	// HTTPTransport. Using your own client will make HTTPTransport, HTTPProxy,
	// HTTPSProxy and CaCerts options ignored.
	HTTPClient *http.Client
	// An optional pointer to http.Transport that will be used with a default
	// HTTPTransport. Using your own transport will make HTTPProxy, HTTPSProxy
	// and CaCerts options ignored.
	HTTPTransport http.RoundTripper
	// An optional HTTP proxy to use.
	// This will default to the HTTP_PROXY environment variable.
	HTTPProxy string
	// An optional HTTPS proxy to use.
	// This will default to the HTTPS_PROXY environment variable.
	// HTTPS_PROXY takes precedence over HTTP_PROXY for https requests.
	HTTPSProxy string
	// An optional set of SSL certificates to use.
	CaCerts *x509.CertPool
	// MaxErrorDepth is the maximum number of errors reported in a chain of errors.
	// This protects the SDK from an arbitrarily long chain of wrapped errors.
	//
	// An additional consideration is that arguably reporting a long chain of errors
	// is of little use when debugging production errors with Sentry. The Sentry UI
	// is not optimized for long chains either. The top-level error together with a
	// stack trace is often the most useful information.
	MaxErrorDepth int
}

By default, TLS uses the host's root CA set. If you don't have ca-certificates (which should be your go-to way of fixing the issue of the missing certificates) and want to use gocertifi instead, you can provide pre-loaded cert files as one of the options to the sentry.Init call:

Copied
package main

import (
	"log"

	"github.com/certifi/gocertifi"
	"github.com/getsentry/sentry-go"
)

sentryClientOptions := sentry.ClientOptions{
	Dsn: "https://examplePublicKey@o0.ingest.sentry.io/0",
}

rootCAs, err := gocertifi.CACerts()
if err != nil {
	log.Println("Could not load CA Certificates: %v\n", err)
} else {
	sentryClientOptions.CaCerts = rootCAs
}

sentry.Init(sentryClientOptions)

sentry-go SDK has few built-in integrations that enhance events with additional information, or manage them in one way or another.

If you want to read more about them, see the source code directly.

However, there are some cases where you may want to disable some of them. To do this, you can use the Integrations configuration option and filter unwanted integrations. For example:

Copied
sentry.Init(sentry.ClientOptions{
	// ...
	Integrations: func(integrations []sentry.Integration) []sentry.Integration {
		var filteredIntegrations []sentry.Integration
		for _, integration := range integrations {
			if integration.Name() == "ContextifyFrames" {
				continue
			}
			filteredIntegrations = append(filteredIntegrations, integration)
		}
		return filteredIntegrations
	},
})
Help improve this content
Our documentation is open source and available on GitHub. Your contributions are welcome, whether fixing a typo (drat!) or suggesting an update ("yeah, this would be better").