Configuration is passed as part of the client initialization:

Raven.configure do |config|
  config.dsn = ''
  config.attr = 'value'

Optional settings

When an error or message occurs, the notification is immediately sent to Sentry, synchronously. This means that returning a response to a user may be delayed.

We recommend creating a background job, using your background job processor, that will send Sentry notifications. The client will pass a JSON-compatible Hash representation of the Event into the callback.

config.async = lambda { |event|

If the async callback raises an exception, Raven will attempt to send synchronously.

If you want to clean up exceptions' backtrace before it's sent to Sentry, you can specify a callback with backtrace_cleanup_callback to do that. For example:

config.backtrace_cleanup_callback = lambda do |backtrace|

Sentry supports two breadcrumbs loggers in the Ruby SDK:

  • SentryLogger - A general breadcrumbs logger for all Ruby applications.
  • ActiveSupportLogger - Built on top of Rails ActiveSupport's instrumentation and provides many Rails-specific information.

And you can enable them with the breadcrumbs_logger option:

config.breadcrumbs_logger = :sentry_logger
config.breadcrumbs_logger = :active_support_logger
config.breadcrumbs_logger = [:sentry_logger, :active_support_logger]

While unlikely that you’ll need to change it, by default Raven compresses outgoing messages with gzip. This has a slight impact on performance, but due to the size of many Ruby stack trace it’s required for the serve to accept the content.

To disable gzip, set the encoding to ‘json’:

config.encoding = 'json'

As of v0.10.0, events will be sent to Sentry in all environments. If you do not wish to send events in an environment, we suggest you unset the SENTRY_DSN variable in that environment.

Alternately, you can configure Raven to run only in certain environments by configuring the environments list. For example, to only run Sentry in production:

config.environments = %w[ production ]

Sentry automatically sets the current environment to RAILS_ENV, or if it is not present, RACK_ENV. If you are using Sentry outside of Rack or Rails, or wish to override environment detection, you’ll need to set the current environment by setting SENTRY_CURRENT_ENV or configuring the client yourself:

config.current_environment = 'my_cool_environment'

If you never wish to be notified of certain exceptions, specify ‘excluded_exceptions’ in your config file.

In the example below, the exceptions Rails uses to generate 404 responses will be suppressed.

config.excluded_exceptions += ['ActionController::RoutingError', 'ActiveRecord::RecordNotFound']

You can find the list of exceptions that are excluded by default in Raven::Configuration::IGNORE_DEFAULT. It is suggested that you append to these defaults rather than overwrite them with =.

Inspect an incoming exception's causes when determining whether or not that exception should be excluded. This option works together with excluded_exceptions. Default value is false.

config.inspect_exception_causes_for_exclusion = false

The logger used by Sentry. Default is an instance of Raven::Logger.

config.logger =

Raven respects logger levels.

If you need to sanitize or pre-process (before its sent to the server) data, you can do so using the Processors implementation. By default, a few processors are installed. The most important is Raven::Processor::SanitizeData, which will attempt to sanitize keys that match various patterns (e.g. password) and values that resemble credit card numbers.

In your Sentry UI, data which has been sanitized will appear as “****” (or 0, if the value was an Integer).

To specify your own (or to remove the defaults), simply pass them with your configuration:

config.processors = [MyOwnProcessor]

Check out Raven::Processor::SanitizeData to see how a Processor is implemented.

You can also specify values to be sanitized. Any strings matched will be replaced with the string mask (****), and integers that are matched will be replaced with 0. Only String and Integer values can be sanitized, though the client will recursively traverse Hashes and Arrays to look for sanitizable values. One good use for this is to copy Rails’ filter_parameters:

config.sanitize_fields =

The client scrubs the HTTP “Authorization” header of requests before sending them to Sentry, to prevent sensitive credentials from being sent. You can specify additional HTTP headers to ignore:

You can also provide regex-like strings to the sanitizer:

config.sanitize_fields = ["my_field", "foo(.*)?bar"]

It’s also possible to remove HTTP header values which match a list:

config.sanitize_http_headers = ["Via", "Referer", "User-Agent", "Server", "From"]

For more information about HTTP headers which may contain sensitive information in your application, see RFC 2616.

By default, Sentry sends up a stack trace with an exception. This stack trace may contain data which you may consider to be sensitive, including lines of source code, line numbers, module names, and source paths. To wipe the stack trace from all error reports, require and add the RemoveStacktrace processor:

require 'raven/processor/removestacktrace'

Raven.configure do |config|
  config.processors << Raven::Processor::RemoveStacktrace

By default, Sentry does not send POST data or cookies if present. To re-enable, remove the respective processor from the chain:

Raven.configure do |config|
  config.processors -= [Raven::Processor::PostData] # Do this to send POST data
  config.processors -= [Raven::Processor::Cookies] # Do this to send cookies by default

A string with the URL of the HTTP proxy to be used.

config.proxy = ''

Rails catches exceptions in the ActionDispatch::ShowExceptions or ActionDispatch::DebugExceptions middlewares, depending on the environment. When rails_report_rescued_exceptions is true (it is by default), Raven will report exceptions even when they are rescued by these middlewares.

If you are using a custom exceptions app, you may wish to disable this behavior:

config.rails_report_rescued_exceptions = false

Track the version of your application in Sentry.

We guess the release intelligently in the following order of preference:

  • Commit SHA of the last commit (git)
  • Reading from the REVISION file in the app root
  • Heroku’s dyno metadata (must have enabled via Heroku Labs)
config.release = '721e41770371db95eee98ca2707686226b993eda'

The sampling factor to apply to events. A value of 0.00 will deny sending any events, and a value of 1.00 will send 100% of events.

# send 50% of events
config.sample_rate = 0.5

By providing a proc or lambda, you can control what events are captured. A String (if you’ve captured a message) or the Exception (if you’ve captured an exception) will be passed to the Proc or lambda you provide - returning false will stop the event from sending to Sentry:

config.should_capture = { |e| true unless e.contains_sensitive_info? }

Upon start, Raven will write the following message to the log at the INFO level:

** [out ::] I, [2014-07-22T15:32:57.498368 #30897] INFO – : ** [Raven] Raven 0.9.4 ready to catch errors”

You can turn off this message:

config.silence_ready = true

By default SSL certificate verification is enabled in the client. It can be disabled.

config.ssl_verification = false

Default tags to send with each event.

config.tags = { foo: :bar }

If the transport fails to send an event to Sentry for any reason (either the Sentry server has returned a 4XX or 5XX response), this Proc or lambda will be called.

config.transport_failure_callback = lambda { |event, error|
  AdminMailer.email_admins("Oh god, it's on fire because #{error.message}!", event).deliver_later

Provide a lambda or proc. This will be called before sending an event to Sentry. Receives an event and hint as parameter. hint is a dict {:exception => ex | nil, :message => message | nil}. It is possible to mutate the event, also if this function returns nil the event will be dropped and not sent.

  config.before_send = lambda { |event, hint|
    event.fingerprint = ['fingerprint']

Environment Variables

After you complete setting up a project, you’ll be given a value which we call a DSN, or Data Source Name. It looks a lot like a standard URL, but it’s actually just a representation of the configuration required by Raven (the Sentry client). It consists of a few pieces, including the protocol, public and secret keys, the server address, and the project identifier.

With Raven, you may either set the SENTRY_DSN environment variable (recommended), or set your DSN manually in a config block:

# in Rails, this might be in config/initializers/sentry.rb
Raven.configure do |config|
  config.dsn = ''
You can edit this page on GitHub.